Certificationvce shares the latest Microsoft MCSA 70-740 exam dumps for free exam practice tests and online downloads! “Installation, Storage, and Compute with Windows Server 2016” 70-740 exam. Ready to pass the 70-740 exam please click https://www.pass4itsure.com/70-740.html (full exam dump)
Microsoft MCSA 70-740 Exam pdf
[Apr PDF] Free Microsoft 70-740 pdf dumps download from Google Drive: https://drive.google.com/open?id=1MFFKR6qmIj-iVx6h37XvsAuF-00U0oFT
[Oct PDF] Free Microsoft 70-740 pdf dumps download from Google Drive: https://drive.google.com/open?id=1LSGl4CZIkuuuFUNb-3wJRibaUTjYg0FB
Exam 70-740: Installation, Storage, and Compute with Windows Server 2016: https://www.microsoft.com/en-us/learning/exam-70-740.aspx
Skills measured
This exam measures your ability to accomplish the technical tasks listed below.
- Install Windows Servers in Host and Compute Environments (10-15%)
- Implement Storage Solutions (15-20%)
- Implement Hyper-V (20-25%)
- Implement Windows Containers (5-10%)
- Implement High Availability (30-35%)
- Maintain and Monitor Server Environments (10-15%)
Microsoft MCSA 70-740 Online Exam Practice Questions
QUESTION 1
Your network contains an Active Directory domain. The domain contains a new file server named Server1 that runs a
Server Core installation of Windows Server 2016.
Server1 has an ReFS-formatted volume D: and NTFS-formatted volume E: The volumes do not contain any data.
You install the Data Deduplication role service on Server1.
You need to implement Data Deduplication for volumes on D: and E:.
Solution: From Windows PowerShell, you run Format-Volume D: -FileSystem EXFat and Enable-DeDupVolume
-Volume D:,E:.
Does this meet the goal?
A. Yes
B. No
Correct Answer: B
QUESTION 2
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some question sets might have more than one correct solution,
while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
You are a server administrator at a company named Contoso, Ltd.
Contoso has a Windows Server 2016 Hyper-V environment configured as shown in the following table.
All of the virtual switches are of the external type.
You need to ensure that you can move virtual machines between the hosts without causing the virtual machines to
disconnect from the network.
Solution: You implement live migration by using Host2 and Host4.
Does this meet the goal?
A. Yes
B. No
Correct Answer: B
QUESTION 3
You have a file server named Server1 that runs Windows Server 2016.
You need to create a report that lists all of the share permissions assigned to the security principals on Server1.
How should you complete the command? To answer, drag the appropriate cmdlets to the correct targets. Each cmdlet
may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view
content.
Select and Place:
Correct Answer:
QUESTION 4
You have a server named Served that runs Windows Server 2016. Server1 has the Windows Application Proxy role
service installed. You are publishing an application named. App1 that will use Integrated Windows authentication as
shown in the following graphic.
Use the drop-down menus to select the answer choice that completes each statement based on the information
presented in the graphic.
Hot Area:
Correct Answer:
QUESTION 5
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some question sets might have more than one correct solution,
while
others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
You have a server named Server1 that runs Windows Server 2016.
Server1 hosts a line-of-business application named App1. App1 has a memory leak that occasionally causes the
application to consume an excessive amount of memory.
You need to log an event in the Application event log whenever App1 consumes more than 4 GB of memory.
Solution: You create an event trace data collector.
Does this meet the goal?
A. Yes
B. No
Correct Answer: B
QUESTION 6
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some question sets might have more than one correct solution,
while
others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
You have two servers that run Windows Server 2016.
You plan to create a Network Load Balancing (NLB) cluster that will contain both servers.
You need to configure the network cards on the servers for the planned NLB configuration. Solution: You configure the
network cards to be on the same subnet and to have static IP addresses. You configure the cluster to use multicast.
Does this meet the goal?
A. Yes
B. No
Correct Answer: A
References: https://technet.microsoft.com/en-us/windows-server-docs/networking/technologies/network-load-balancing
QUESTION 7
You want to capture the state, data, and hardware configuration of a running virtual machine.
Which checkpoint can be very useful if you need to recreate a specific state or condition of a running virtual machine so
that you can troubleshoot a problem?
A. Production
B. Standard
Correct Answer: B
Standard checkpoints capture the state, data, and hardware configuration of a running virtual machine and are intended
for use in development and test scenarios.
QUESTION 8
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is
repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is
exactly the same in each question in this series.
A company named Contoso, Ltd. has several servers that run Windows Server 2016. Contoso has a Hyper-V
environment that uses failover clustering and Windows Server Update Services (WSUS). The environment contains
several Windows containers and several virtual machines.
The WSUS deployment contains one upstream server that is located on the company\\’s perimeter network and several
downstream servers located on the internal network. A firewall separates the upstream server from the downstream
servers.
You plan to deploy a human resources application to a new server named HRServer5. HRServer5 contains a
FAT32-formatted data volume.
The CIO of Contoso identifies the following requirements for the company\\’s IT department:
Deploy a failover cluster to two new virtual machines.
Store all application databases by using Encrypted File System (EFS).
Ensure that each Windows container has a dedicated IP address assigned by a DHCP server.
Produce a report that lists the processor time used by all of the processes on a server named Server1 for five hours.
Encrypt all communication between the internal network and the perimeter network, including all WSUS
communications.
Automatically load balance the virtual machines hosted in the Hyper-V cluster when processor utilization exceeds 70
percent.
You need to configure the storage solution for the planned failover cluster.
You create two new generations 2 virtual machines on two separate Hyper-Vhosts named VM11 and VM12.
Which three actions should you perform in sequence next? To answer, move the appropriate actions from the list of
actions to the answer area and arrange them in the correct order.
Select and Place:
Correct Answer:
QUESTION 9
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some question sets might have more than one correct solution,
while
others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
You have a server named Server1 that runs Windows Server 2016. Server1 hosts a line-of-business application named
App1. App1 has a memory leak that occasionally causes the application to consume an excessive amount of memory.
You need to log an event in the Application event log whenever App1 consumes more than 4 GB of memory.
Solution: You create a performance counter alert data collector.
Does this meet the goal?
A. Yes
B. No
Correct Answer: A
QUESTION 10
Your company has a testing environment that contains an Active Directory domain named contoso com The domain
contains a server named Server1 that runs Windows Server. 2016. Server1 has IP Address Management (IPAM)
installed IPAM has the following configuration.
For each of the following statements, select Yes if the statement is true Otherwise, select No.
Hot Area:
Correct Answer:
QUESTION 11
Note: This question is part of a series of questions that use the same similar answer choices An answer choice may be
correct for more than one question in the series Each question is independent of the other questions in this series.
Information and details provided in a question apply only to that question You have a Hyper-V host named Server1 that
runs Windows Server 2016 and a two-node scale-out file server cluster named Cluster1 A virtual machine named VM1
runs on Server1 You need to migrate the storage on VM1 to Cluster1
Which tool should you use?
A. the clussvc.exe command
B. the cluster.exe command
C. the Computer Management console
D. the configurehyperv.exe command
E. the Disk Management console
F. the Failover Cluster Manager console
G. the Hyper-V Manager console
H. the Server Manager Desktop app
Correct Answer: G
QUESTION 12
You have a server named Server1 that runs Windows Server 2016. Server1 has two network adapters that support
single root I/O virtualization (SR-IOV). The network adapters are from two different vendors.
You plan to install the Hyper-V server role on Server1, and then to create a virtual machine named VM1 that runs
Windows Server 2016. VM1 will use SR-IOV.
You need to ensure that VM1 can use both network adapters for load balancing and failover.
What should you do?
A. On Server1, create two virtual switches without embedded teaming. On VM1, create one NIC team.
B. On Server1, create one virtual switch without embedded teaming. On VM1, create one NIC team.
C. On Server1, create one NIC team. On VM1, create one NIC team.
D. On Server1, create one virtual switch that has embedded teaming. On VM1, create two NIC teams.
Correct Answer: A
QUESTION 13
You have a network that contains several servers that run Windows Server 2016.
You need to use Desired State Configuration (DSC) to configure the servers to meet the following requirements:
-Install the Web Server server role.
-Start the World Wide Web Publishing service.
How should you configure the DSC resources? To answer, drag the appropriate values to the correct locations. Each
value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to
view
content.
Select and Place:
Correct Answer:
Share Pass4itsure discount codes for free
About Pass4itsure!
Pass4itsure offers the latest exam practice questions and answers free of charge! Update all exam questions throughout the year,
with a number of professional exam experts! To make sure it works! Maximum pass rate, best value for money! It helps you pass the exam easily on your first attempt.
Summarize:
How do I pass the Microsoft MCSA 70-740 exam? You need to be prepared for it! You need the latest and most effective learning materials and proper practices to pass the 70-740 exam. “Candidates for this exam are involved with the installation, storage, and compute functionalities available in Windows Server 2016. Candidates perform general installation tasks, as well as creating and managing images for deployment. Candidates should have experience with local and server storage solutions including the configuration of disks and volumes, Data Deduplication, High Availability, Disaster Recovery, Storage Spaces Direct, and Failover Clustering solutions.
The candidates should also be familiar with managing Hyper-V and Containers as well as maintaining and monitoring servers in physical and compute environments”. Pass4itsure offers you the latest exam materials! You can use the materials to prepare to help you achieve excellent results!
This maybe you’re interested